Standard specification for performance requirements for protective (safety) toe cap footwear
I/75 |
Toe caps footwear exceeding impact |
---|---|
C/75 |
Toe caps footwear exceeding compression |
PR |
Puncture resistant footwear |
EH |
Boots and shoes with Electrical Hazard protection |
CS |
The chainsaw boots are provided with a special protection in the forepart to avoid any serious injury to the lower arts in the event that a moving chainsaw (at high kinetic energy) gets out of hand |
SD |
Static dissipative boots and shoes fall in the range of 10-6 - 10-8 Ohm to protect against the hazards of static build-up in the workplace |
MT/75 |
Metatarsal protection footwear |
Standard specification for performance requirements for protective (safety) toe cap footwear
I/C |
Toe caps footwear exceeding Impact and Compression ASTM F2413-18 I/C standards |
---|---|
PR |
Puncture resistant footwear meeting ASTM F2413-18 PR standards |
EH |
Boots and shoes with Electrical Hazard protection are rated ASTM F2413-18 EH standards |
CS |
The chainsaw (CS) boots are provided with a special protection in the forepart to avoid any serious injury to the lower arts in the event that a moving chainsaw (at high kinetic energy) gets out of hand |
SD |
Static-dissipative footwear designed to have a defined electrical resistance in a specific range, such as to protect the user from the risk of electric shock and at the same time preserve the devices in the SD working environment |
SD10 |
Footwear with minimum electrical resistance of 10 exp 6 ohm and maximum 0.1 exp 8 ohm, recommended in working envi-ronments with high risk of damage to devices |
SD35 |
Footwear with minimum electrical resistance of 10 exp 6 ohm and maximum 3.5 exp 8 ohm, recommended in working envi-ronments with moderate risk of damage to devices |
SD100 |
Footwear with minimum electrical resistance of 10 exp 6 ohm and maximum 10 exp 8 ohm, recommended in working envi-ronments with low risk of damage to devices |
Mt |
Metatarsal protection footwear meeting ASTM F2413-18 Mt standards |