Using workwear means wearing a uniform with the distinctive signs of the worker’s company. For this reason, COFRA can personalise the garments with the logos of its customers. The available technologies are serigraphy, transfer and embroidery, according to the user’s preference.
Our technical staff is at your complete disposal to define the best solution of personalisation.
From now on it is possible to personalise your garments: it will be possible to add reflex inserts on trousers, coats, t-shirts and jackets, wherever you want, as many as you need, according to the features of the selected garment.
Hot stamping (transfer or serigraphy) is the best choice since the water resistance of waterproof garments does not change; embroidery is not recommended since taping of the inner part would be necessary.
For high-visibility garments it is important that the value of the surface of fluorescent material does not change (the class indicated on each garment should not be lower than the range defined by the EN 471). Therefore, the company logo should have the best size both for the garment and the user’s needs.
The best choice to personalise polar fleece is embroidery, since hot stamping fabric would not resist to high temperatures. For t-shirts, the logo personalisation with hot stamping (transfer or serigraphy) is excellent in terms of quality and colour.
TD000 |
245 g/m2 |
60% cotton - 40% polyester |
WORKWEAR |
|||||||
---|---|---|---|---|---|---|---|---|---|---|
Twill 3/1 policotton combines the breathability and softness of the cotton, resistance to abrasion and to repeated washings of the polyester to firmness of colours, with a traction resistance value exceeding three times the standard requirement. It can be either water-washed at a maximum temperature of 60 °C or dry-cleaned, keeping its colour and dimension at each washing. |
||||||||||
TD002 |
245 g/m2 |
65% polyester - 35% cotton |
ENTRY-L |
|||||||
Long lasting fabric which ensures colour stability, washing and abrasion resistance. It can be either washed at a maximum temperature of 40 °C or dry-cleaned, keeping colours during time. |
||||||||||
TD004 |
350 g/m2 |
97% cotton - 3% elastan |
WARM PRO |
|||||||
Fabric with superb resistance of colours to washings, abrasion and wear. It can be water-washed at a maximum temperature of 40 °C or dry-cleaned, leaving colours unaltered. Moreover, the elastane makes the fabric “stretch” both vertically and horizontaly. Thus granting superb comfort. |
||||||||||
TD005 |
300 g/m2 |
65% polyester - 35% cotton |
ENTRY-L |
|||||||
Fabric with superb resistance of colours to washings, abrasion and wear. It can be water-washed at a maximum temperature of 40 °C or dry-cleaned, leaving colours unaltered.
|
||||||||||
TD006 |
245 g/m2 |
100% cotton |
COTTON PRO |
|||||||
Fabric with superb resistance of colours to washings, abrasion and wear. It can be either water-washed at a maximum temperature of 40 °C or dry-cleaned, leaving colours unaltered. Comfort and breathability are guaranteed by the 100% natural fiber composition.
|
||||||||||
TD007 |
245 g/m2 |
65% polyester - 35% cotton |
ENTRY-L |
|||||||
Fabric characterized by fluorescent colours complying with EN ISO 20471:2013 for high visibility, with superb resistance of colours to washings, abrasion and wear. |
||||||||||
TD008 |
300 g/m2 |
65% polyester - 35% cotton |
PAINTER |
|||||||
X-BARRIER high technology canvas fabric, with a nanotechnology treatment which makes garments waterproof, stain repellent, abrasion resistant and ensures colour stability. It can be water-washed at a maximum temperature of 70 °C or dry-cleaned, leaving colours unaltered.
|
||||||||||
TD009 |
245 g/m2 |
100% cotton |
PAINTER |
|||||||
X-BARRIER high technology canvas fabric, with a nanotechnology treatment which makes garments waterproof, stain repellent, abrasion resistant and ensures colour stability. It can be water-washed at a maximum temperature of 70 °C or dry-cleaned, leaving colours unaltered. Comfort and breathability are guaranteed by the 100% natural fiber composition.
|
||||||||||
TD010 |
290 g/m2 |
60% cotton - 40% polyester |
WORKWEAR |
|||||||
Twill 2/2 policotton particularly resistant to external solicitations. Very good results as for the firmness of the colours. It can be either water-washed at a maximum temperature of 60 °C or and dry-cleaned, keeping its colour and dimension at each washing.
|
||||||||||
TD011 |
300 g/m2 |
65% polyester - 35% cotton |
ENTRY-L |
|||||||
Fabric characterized by fluorescent colours complying with EN ISO 20471:2013 for high visibility, with superb resistance of colours to washings, abrasion and wear. |
||||||||||
TD012 |
300 g/m2 |
100% cotton |
COTTON PRO |
|||||||
Fabric with superb resistance of colours to washings, abrasion and wear. It can be either water-washed at a maximum temperature of 40 °C or dry-cleaned, leaving colours unaltered. Comfort and breathability are guaranteed by the 100% natural fiber composition.
|
||||||||||
TD019 |
290 g/m2 |
78% cotton - 21% polyester - 1% elastan |
JEANS |
|||||||
Highly breathable jeans fabric, with COOLMAX® fibre endowed with a special structure which evaporates moisture and quickly moves it away from the skin. Moreover, the elastane makes the fabric “stretch”. The fabric is soft and cool, thus granting superb comfort.
|
||||||||||
TD020 |
250 g/m2 |
100% cotton |
CANVAS |
|||||||
Fabric made of a special canvas texture which ensures outstanding resistance to abrasion and shrinkage. Its comfort and ability lo let the skin transpire come from the 100% natural fibre composition. It can be either water-washed at a maximum temperature of 60 °C or dry-cleaned.
|
||||||||||
TD025 |
320 g/m2 |
65% polyester - 35% cotton |
TECH-WEAR |
|||||||
X-BARRIER high technology canvas fabric, with a nanotechnology treatment which makes garments waterproof, stain repellent, abrasion resistant andensures colour stability.
|
||||||||||
TD030 |
240 g/m2 |
60% cotton - 40% polyester |
HIGH VISIBILITY |
|||||||
Policotton cloth, certified according to the OEKO-TEX® standard 100, characterized by fluorescent colours complying with EN ISO 20471:2013 standard for high visibility, with high performances as regards resistance of the colour to washings, to perspiration and to rubbing. It combines lightness and freshness to resistance to traction and abrasions. It can be either water-washed at a maximum temperature of 60 °C or dry-cleaned, keeping its colour at each washing.
|
||||||||||
TD040 |
290 g/m2 |
60% polyester - 40% cotton |
HIGH VISIBILITY |
|||||||
Twill policotton certified according to the OEKO-TEX® standard 100, characterized by fluorescent colours complying with EN ISO 20471:2013 for high visibility, with high performances as regards resistance of the colour to washings, to perspiration and to rubbing. It resists to traction and to abrasions thanks to its weight of 290 g/m2, it can be either water-washed at a maximum temperature of 60 °C or dry-cleaned, keeping its colour at each washings.
|
||||||||||
TD050 |
200 g/m2 |
100% polyester polyurethane coated |
WINTER |
|||||||
Oxford fabric with good performances as regards resistance to tears and to traction; polyurethane-coated, this fabric grants maximum water resistance and breathability at the same time (class 3 – 3 as required by UNI EN 343:2008).
|
||||||||||
TD060 |
200 g/m2 |
100% polyester polyurethane coated |
HIGH VISIBILITY |
|||||||
Oxford fabric characterized by fluorescent colours complying with EN ISO 20471:2013 standard with high performances in terms of solidity of the colour to washings, to perspiration and to rubbing, as well as of resistance to tears and traction. polyurethane-coated, this fabric grants maximum water resistance and breathability at the same time (class 3 – 3 as required by UNI EN 343:2008). |
||||||||||
TD080 |
320 g/m2 |
100% nylon CORDURA® |
WINTER WORKWEAR |
|||||||
High technology fabric engineered to guarantee maximum resistance and duration, as well as lightness and easy care. It can be used to strengthen the areas more liable to wear and tear, such as knees, elbows and pockets.
|
||||||||||
TD108 |
250 g/m2 |
94% polyester - 6% elastan |
WINTER |
|||||||
Fabric with COFRA-TEX membrane, which guarantees excellent performance of waterproofness and breathability at the same time (class 3-3 in accordance with UNI EN 343:2008 standard), the elastane in the fabric makes it “stretch” both vertically and horizontally, granting high comfort.
|
||||||||||
TD108 |
250 g/m2 |
94% polyester - 6% elastan |
HIGH VISIBILITY |
|||||||
Fabric characterized by fluorescent colours complying with EN ISO 20471:2013 for high visibility, with superb resistance of colours to washings, perspiration and rubbing. The COFRA-TEX membrane guarantees excellent performance of waterproofness and breathability (class 3-3 in accordance with UNI EN 343:2008 standard). The elastane in the fabric makes it “stretch” both vertically and horizontally, granting high comfort.
|
||||||||||
TD200 |
190 g/m2 |
80% cotton - 19% polyester - 1% carbon |
FLAME RETARDANT |
|||||||
Very light ad soft antiflame fabric designed by COFRA it protects from contact with flame, convective and radiant heat (EN ISO 11612:2008); antistatic fabric (EN 149-5:2008). |
||||||||||
TD201 |
300 g/m2 |
100% cotton |
FLAME RETARDANT |
|||||||
The fabric is treated but confortable, soft and resistant, and it protects the wearer’s body against sparks, molten metal splashes and droplets produced in welding and allied processes (EN ISO 11611:2007); it protects against flame and radiant or convective heat (EN ISO 11612:2008). Softness and comfort are granted thanks to its 100% cotton composition.
|
||||||||||
TD202 |
310 g/m2 |
88% cotton - 11% nylon - 1% carbon |
FLAME RETARDANT |
|||||||
X-GUARD is the result of COFRA research with the aim of designing multifunctional workwear. The special compound is mainly made of cotton, providing comfort and softness. It is also nylon-reinforced, which increases wear and abrasion resistance. The garments protect against contact with flames, convective, radiant heat, caused by electric arc, splashes of molten metal, electrostatic charges in conformity with European standards.
|
||||||||||
TD203 |
345 g/m2 |
100% cotton denim |
FLAME RETARDANT |
|||||||
Anti-flame and antistatic jeans fabric: the special treatment slows down the burning after the source of flame is distanced. It provides great resistance to abrasion and tear, as well as protection against flames and molten metal droplets produced during welding. |
||||||||||
TD207 |
290 g/m2 |
80% cotton – |
JEANS |
|||||||
Cotton jeans fabric, improved thanks to the adding of CORDURA® fibre which makes it more durable, wear and tear resistant, and to elastane LYCRA® fibre, that makes it more elastic, simplifying movements. Available in 3 different weights: 290 - 375 - 425 g/m2 which define the robustness rate.
|
||||||||||
TD210 |
410 g/m2 |
80% cotton - 19% polyester - 1% elastan |
JEANS |
|||||||
Denim elasticated fabric mixed with THERMOLITE® threads, which enhances the thermal insulation of trousers, with no need of heavy fabrics, it makes the drying of garments faster in the event of light drizzle, it improves the ease of movement thanks to the elastomer and to the reduced weight of the textile. The THERMOLITE® thread, light and comfortable, has a special structure characterized by a hollow fibre which lets air come in, functioning as thermal insulating device. It is able to convey humidity and moisture along the whole surface of fabric, thus making drying faster. Without any kind of chemical treatment, the new textile guarantees constant warmth whatever the external temperature is; it enhances comfort during the physical effort.
|
||||||||||
TD211 |
215 g/m2 |
100% polyester ripstop PVC coated |
WINTER |
|||||||
Fabric with Rip-stop yarn that enhances the tear resistance. The internal PVC coating, meeting the requirements of REACH regulation, assures breathability and maximum waterproofness (class 3-1 complying with UNI EN 343:2008 standard). |
||||||||||
TD212 |
195 g/m2 |
100% polyester PVC coated |
WINTER |
|||||||
Fabric with internal PVC coating, complying with all the requirements of REACH regulation. The PVC coating assures maximum waterproofness. |
||||||||||
TD213 |
140 g/m2 |
65% polyester - 35% cotton |
ENTRY-L |
|||||||
Fabric with good performance of colour retention, washings, abrasion, lasting in time: it can be both dry cleaned and washed in water at 30 °C, retaining colour after washings.
|
||||||||||
TD214 |
270 g/m2 |
100% cotton |
MASSAUA |
|||||||
Fabric with good performance of colour retention, washings, abrasion, lasting in time: it can be both dry cleaned and washed in water at max 60 °C, retaining colour. Comfort and breathability are guaranteed from the 100% natural fibre composition. CARE |
Maximum temperature: 30 °C |
|
Maximum temperature: 40 °C |
|
Maximum temperature: 60 °C |
|
Maximum temperature: 70 °C |
|
Handwash only. Maximum temperature: 40 °C |
|
Do not wash |
|
Mild treatment: in addition to the basic symbols, a bar under the symbol means that the treatment should be more mild than indicated by the same symbol without a bar, e.g. reduced agitation |
|
Very mild treatment: in addition to the basic symbols, a double bar under the symbol describes a very mild process, e.g. much reduced agitation |
|
Bleaching allowed only in cold water and using a diluted solution |
|
Bleaching allowed only with oxigen / chlorine free products |
|
Do not bleach |
|
Do not dry in a tumble dryer |
|
Drying allowed in tumble dryer |
|
|
|
|
|
Dry on a horizontal surface |
|
Dry in a vertical (hanging) position after squeezing and/or spinning |
|
Dry in a vertical position while the product is still full of water, without squeezing and/or spinning |
|
Drying in the shade |
|
Do not iron |
|
Ironing at low temperature (max 110 °C) |
|
Ironing at middle temerature (max 150 °C) |
|
Ironing at high temperature (max 200 °C) |
|
Dry clean with hydrocarbons (boiling point between 150 °C and 210 °C, flammability point between 38 °C and 70 °C |
|
Dry clean with solvents on point F plus Tetrachloroethylene |
|
Do not dry clean |
EN 14404:2005 |
---|
The standard specifies the requirements of the kneepads for use while kneeling. |
EN 340:2003 - EN ISO 13688:2013 |
---|
This standard specifies general performance requirements for ergonomics, ageing, size designation and marking of protective clothing. Clothing shall be designed and manufactured to provide users with the highest comfort. Components and materials shall not cause adverse effects to the user like allergy, irritation or lesion. The size range shall be based on body dimensions. |
EN ISO 20471:2013 | |||||
---|---|---|---|---|---|
Any high visibility garment is certified according to the chart quoted here below following the minimum areas of fluorescent materials which grant more visibility during the day. The band on the back retroreflects the artficial light ( car lights) allowing more visibility during the night. X: class of base and retroreflective material area ((see table 1, class 1 to 3)) |
|||||
MINIMUM REQUIRED AREAS OF VISIBILE MATERIAL |
Class 3 garments |
Class 2 garments |
Class 1 garments |
||
Fluorescent base material (m2) |
0,80 m2 |
0,50 m2 |
0,14 m2 |
||
Retroreflective material (m2) |
0,20 m2 |
0,13 m2 |
0,10 m2 |
||
To get a superior class the standard provides to match two high visibility garments in this way a higher level of protection is granted. HERE SOME EXAMPLES: |
|||||
|
JACKET DAZZLE |
WAISTCOAT SEKI |
T-SHIRT RADAR |
||
TROUSERS TWINKLE |
Base material 1,45 m2 |
Base material 1,23 m2 |
Base material 1,39 m2 |
||
SHORTS VISIBLE |
Base material 1,11 m2 |
Base material 0,89 m2 |
Base material 1,05 m2 |
EN 342:2004 | |
---|---|
This standard specifies the requirements for performance of clothing ensembles i.e. two piece suits or coveralls) against environment characterized by the combination of cold, humidity and wind at air temperature below –5 °C. Specific linings and special technical devices allow the garment to breathe and at the same time to keep the user warm. X: Thermic insulation of the garment on a moving manikin |
EN 14058:2004 Garments for protection against cool environments. | |
---|---|
This European Standard specifies requirements and test methods for the performance of single garments for protection against cooling of the body in cool environment. Cool environment: environment characterized in general as a possible combination of humidity and wind at temperature of -5 °C and above. At moderate low temperature garments against local body cooling are not only used for outdoor activities e.g. in construction industry but can be used for indoor activities.
Y: Thermal Resistance (Rct) Y: Air permeability (optional) Y: Water penetration resistance (optional) Y: Thermal insulation measured on moving manikin Icler (m2 K/W) (optional) Y: Thermal insulation measured on stationary manikin Icler (m2 K/W) (optional)
X indicates that the garment has not been submitted to one of the two optional tests. |
EN 15797:2004 |
---|
ISO 15797 specifies test procedures and equipment which can be used in the evaluation of cotton, polyester/cotton and reverse blend workwear intended to be industrially laundered. |
UNI EN 343:2008 |
---|
This European Standard specifies requirements and test methods applicable to material and seams of protective clothing against the influence of precipitation (e.g. rain, snowflakes) fog and ground humidity. Garments shall be designed and manufactured paying particularly attention to water penetration and using waterproof and breathable materials in order to ensure absolute waterproofness to the garment as well as outstanding comfort level. X: resistance to water penetration (class 1 to 3) |
EN ISO 11612:2008 |
---|
This standard specifies the requirements for performance of clothing designed to protect all parts of body against heat and flames, specifies the requirements of overalls and two-piece suits, by the use of specific materials and defined requirements of design, to guarantee a performance level in compliance with standard and regulated by different values of resistance to heat. The clothing can be in compliance with standard even without any reference values from B to W. A: flame spread |
EN ISO 14116:2008 | ||||
---|---|---|---|---|
This standard specifies the performance requirements of materials, material assemblies and limited flame spread protective clothing in order to reduce the possibility of the clothing burning and thereby itself constituting a hazard. |
||||
INDEX 1 |
INDEX 2 |
INDEX 3 |
PROPERTY |
REQUIREMENT |
X |
X |
X |
Flame spread |
No specimen shall permit any part of the lowest boundary of any flame to reach the upper or vertical edge |
X |
X |
X |
Flaming debris |
No specimen shall give off flaming debris |
X |
X |
X |
Afterglow |
No afterglow shall spread from the carbonized area to the undamaged area after the cessation of flaming |
|
X |
X |
Hole formation |
No specimen shall show hole formation |
|
|
X |
Afterflame |
The afterflame time of each individual specimen shall not exceed 2 s |
NOTE: The propagation rate of limited flame must always be indicated with the cleaning rate as follows: X propagation rate of Y limited flame. Number of washing cycles the specimen was subjected to - I (industrial laundry) -H (domestic laundry) -C (dry cleaning with perchloroethylen) /Z washing temperature. Example: PETERSBURG, PECS and MELK items 1/30H/40 indicates a material complying with the flammability rate 1, subjected 30 times to domestic laundry at 40 °C.
EN ISO 11611:2007 |
---|
This standard specifies performance and minimum protective requirements of clothes designed to protect all parts of body against sparks, splashes of molten metal and droplets, produced during weldings and allied processes. Class 1: Manual welding techniques producing a few splashes and dropletsClass 2: Manual welding techniques producing many splashes and droplets A1 or A2: Flame propagation |
CEI EN 61482-1-2:2008 |
---|
This standard specifies the performance requirements of the garments devised to protect the whole body against thermal risks of an electric arch due to an accidental and unexpected short circuit in electrical systems. Method 1-2: room test with constrained electric arc: the test is carried out according to 2 classes on the basis of the current of the predicted short-circuit. Current test 400 V c.a. Durations of arc 500 ms Class 1: the garment guarantees the minimum level of protection against thermal risks of an electric arch. Current test 4 KA |
EN 1149-5:2008 | |
---|---|
|
The standard specifies the requirements of both materials and construction of garments for electrostatic dissipation, to be used as a part of a whole system of ground wire in order to avoid electric discharge which may cause fire. Protective clothing against electrostatic charges |
Direttiva EU 1999/92/CE - ATEX (ATmospheres EXplosibles) |
---|
The EU Directive 1999/92/CE (Atex Directive) indicates the requirements for safety and health protection of workers potentially at risk from explosive atmospheres. COFRA’s garments comply with all requirements about the materials and the manufacturing indicated by the standard UNI EN 1149-5 (antistatic garments): they avoid that electrostatic discharges cause fires, thus making the garment suitable to be used in ATEX environments. |
EN 13034:2005+A1:2009 |
---|
This standard specifies performance and minimum protective requirements of clothes designed to provide a limited protection against liquid chemicals. A1: Resistance to penetration |
EN 14605:2005+A1:2009 |
---|
The standard specifies the minimum requirements for the garment protecting against splashes (Type 4). Compared to garments Type 6 (protection against liquid splashes) this standard includes the possibility that the operator, above all in case of emergency, gets in touch with the contaminant for a prolonged time and in a considerably higher quantity (Permeation Test). |
EN ISO 13982-1:2004 +A1:2010 |
---|
The standard specifies the minimum requirements for the garment protecting against chemicals resistant to penetration of airborne solid particulates (Type 5). |
EN 14126:2003 |
---|
Clothing providing protection of body in environments where the risk evaluation shows the presence and possibility for the skin to get in touch with hazardous biological agents, like viruses, bacteria, fungi and so on. |
EN 1073-2:2002 | ||
---|---|---|
The standard specifies requirements and tests methods for non-ventilated protective clothing against particulate radioactive contamination. The nominal protection factor (100/TILA) is observed: TILA is the total inward leakage, that is to say the relationship, provided in percentage, between the concentration of the particulates inside the garment and the one inside the test chamber. According to the value, the overall is classified as indicated in the chart. |
||
Class |
Medium value of the total inward leakage in the garment into 3 positions and during all activities (TILA) |
Nominal protection factor 100/ TILA |
3 |
0,2 |
500 |
2 |
2 |
50 |
1 |
20 |
5 |
OEKO-TEX® |
---|
OEKO-TEX® is a voluntary certification of product through which the certified company commits itself to keep in time the safeness of its own products. The OEKO-TEX® 100 mark guarantees that the textiles (or accessories of the textiles, metallic ones included) do not contain or release harmful substances for the consumer (pesticides, heavy metals, formaldehyde, aromatic amines, allergy-inducing dyestuffs and so on). The garments certified by OEKO-TEX® comply with the requirements demanded by the standard EN ISO 13688:2013 and they abide by the requirements of the attachment XVII of REACH (regulation 552:2009) having the textile product as area of pertinence. |
REACH |
---|
In order to safeguard the consumers’ health, the European Union issued the REACH regulation (come into force on 1st June 2007) which forbids the use of certain chemicals. COFRA guarantees the compliance of all its garments with the REACH regulation; they do not contain forbidden or limited substances (Aromatic amines and 4-aminobenzoic acid deriving from azo dyes, heavy metals, phthalates, and so on) and, to guarantee it, all garments and accessories used during production are subjected to controls. |
TP TC 019/2011 |
---|
Technical regulation on the safety of Personal Protective Equipment distributed in the territory of the Eurasian Customs Union. |